Sign In | Join Free | My
KingPo Technology Development Limited
KingPo Technology Development Limited
Home > Formaldehyde Testing Equipment >

Accurate Control Odor Testing Equipment , Odour Measurement Equipment

KingPo Technology Development Limited
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
KingPo Technology Development Limited
City: Hong Kong
Province/State: Hong Kong
Country/Region: China
Tel: 86-769- 81627526
Contact Person:
Ms Lynette Wong

Accurate Control Odor Testing Equipment , Odour Measurement Equipment

Brand Name : KingPo
Certification : Calibration Certificate
Place of Origin : China
MOQ : 1
Price : To be quoted
Payment Terms : T/T
Packaging Details : Satety plastic tool box or plywood package
temp. range : Environmental temp ±20℃~+200℃
heating-up time : ≤60min
Temperature and humidity regulating method : Forced hot wind circulation ventilation mode
working environment temp. : 0~+40℃
Shell : Double galvanized plates,surface spray treatment
Inner tanks : stainless steel SUS201/8K,mirror plate
Contact Now

Odor Test Chamber

Product purpose

High temperature test chamber can be used to test and confirm the odor detection and testing with small sampling bag method of storage and usage of such products as Electrician,electronics,automotive electrical materials,agricultural products and leather under high temp.


Accurate control of temp. and wind speed is achieved through advanced controller,among which air circulation system within the chamber controls the direction and flow rate of air flow in the chamber ,while program settings of the control system reaches the function of temp. change and provides the environmental conditions required for odor test automatically.High temp. chamber is sealed with low odor volatile materials of full welded,and its air should be exchanged with clean air outside.

Reference Standards

• GB/T 2423.2-2001 Test B:high temeprature test method

• GJB 150.3-1986 high temperature test

• IEC68-2-2 Test B:dry heat

• GB11158 Techinical conditions of high temperature test chamber

• GB/T2423.2 Basic Environment of Electric and Electronic Products Test

• QJQ 11052-2010 Odor test method for interiors of vehicles

• MS 300-34 Odor test method for interior of vehicles

• GB/T18885-2009 Ecological textile

• QB/T2725-2005 Determination of Leather Odor

• GB18401-2003 Specifications for Basie Safety Technology of National Textile

Technical Parameters:

Performancetemp. rangeEnvironmental temp ±20℃~+200℃
temp. fluctuationIf ≤100℃,0.4℃;≤200℃,0.,8℃
temp. deviationIf ≤100℃,±1.5℃;≤200℃,±2℃
heating-up timeEnvironmental temp ±20℃~+200℃
Internal dimension600*600*600830*1200*8001000*1000*10002000*1000*20002000*2000*2000
External dimension800*1200*12951030*1800*14951730*1480*12752700*1800*27502700*2400*3200
Temperature and humidity regulating methodForced hot wind circulation ventilation mode
working environment temp.0~+40℃
MaterialShellDouble galvanized plates,surface spray treatment
Inner tanksstainless steel SUS201/8K,mirror plate
Heat preservationglass fibre
HeaterNi Cr alloy fin type electric heater
draught fanAxial flow fan
ventilation doorManual switching(opening degree is adjustable)
ControllerOperation modeProgram operation controller
setting range0~+120℃
setting accuracyTemp:1℃, time : 1min
Display resolutionTemp : 0.1℃, time : 1min
Operating interfaceaccording to the setting mode
control methodPID+SSR
InputK type thermocouple
Auxillary functionInput disconnection,detection function,uooer limit temperature alarm function,buzzer alarm function,automatic temperature overhet prevention function,abnormal indication,alarm number display.self-diagnosis function and temp. and time keeping function.
Installed capacity(Kw)6891520
Standard configuration2 sets of sample holders,1 piece of power line(6 meters long) and 1 set of rubber plug and cap of pin hole
PowerAC380V 3 phases 4 lines + protective earth wire
Mounting deviceleakage circuit breaker for the power,overheat protector(upper limit temperature alarm function,fan motor overheat protection switch,control circuit short circuit protection fuse and over temp. protector
OptionalPin hole(Ω50mm Ω100mm); Rubber plug of pin hold(Ω50mm Ω100mm,cooperative use with pin hole); Sample holder,reinforced inner box and chassis,timer meter and temp. grapher; Emergency stop switch,remote monitoring operation,external alarm output terminal, exhaust flange and stainless steel exhaust elbow
Additional products for optional choice smell box(patented product)standard odor smell chamber can be provided,uniform smell test can be realized,and accurate control of temperature,relative humidity,wind speed and indoor air cleanliness can be provided.External standard gases can be controlled with micro elements such as solenoid valve(handle valve) and flowmeter,so that the result of smell test can be more stable,accurate,scientific and standardized.


※ When indoor temperature is ±25℃,it will be under circulating operation without test sample conditions or data measured when exchanging air.

※ Fluctuation is indicated according to the rules of GB/T5170.2-1996,it shows ±0.2℃,±0.4℃ or ±0.6℃

※ Excluding the part with convex shape

※ Optional air inlet purifying device,whose height is incresed by 350mm

※ 4 standard configurations of sampling port,with 12 sampling ports optional.

※ can be used for smell test,ordinary high temp. Chamber test and small sampling bag method test.

Product Tags:

High Temperature Test Chamber


Voc Testing Equipment

China Customized Inflatable Bumper Ball Game Bubble Adult Grass CE supplier

Accurate Control Odor Testing Equipment , Odour Measurement Equipment Images

Inquiry Cart 0
Send your message to this supplier
Enter your email please.
To: KingPo Technology Development Limited
Characters Remaining: (0/3000)