Electrical Temperature Measurement Test Corner
IEC60335-1:2004 Electrical Appliance Tester Temperature Measurement
The temperature measurement corner conforms to the standard
requirement of IEC60335-1:2004 chapter 11. It is designed and
manufactured to provide the required environment for the
temperature rising test of all kinds of electrical, electrical
products. It can be customized according to the different testing
1. Size: 600X600X1000mm,800X800X1000mm,1000x1000x1200mm(it can be customized)
2. Thermocouple: the diameter of the thermocouple is less than
0.3mm. There are three kinds of the thermocouple: K, T, J (any one of it can be chosen)
3. The thermocouple arrangement: All leads on a connection
line(optionally equipped with thermocouple plug and socket)
4. The sheet copper used for temperature measurement: the diameter
of 15mm and the thickness of 1mm.
5. The number of temperature measuring points:20,32,48,64(it can be
6. The arrangement of temperature measuring points:100*100mm or
76*76mm square(it can be customized)
7. Plywood:The thickness is 20mm and the front side is painted with
Berlin black and the reverse side is with gray film back.
8. The movable part: there are 4 removable wheels installed on the
bottom of the device.
9. The height of the wheel is about 100mm. The top plate is
equipped with hook whose load bearing is 15Kg.
10. Temperature patrol system needs to be equipped additionally
(optionally equipped with 48 road tour temperature table)